Take your first step towards the Career of your Dreams,

Discover Indovance Download our Brochure

Edit Template

Are You Ready for the New Part L Building Regulations Update?


The government has amended the Building Regulations to move toward a Future Buildings Standard, including a requirement that all new residences must reduce their carbon footprint by 30%, and other buildings, such as workplaces and retail establishments, must reduce their carbon footprint by 27%. 

It has never been more important to ensure that building codes address the net-zero challenge head-on. The numbers are startling: the built environment accounts for 37% of the world’s energy-related carbon emissions, and the construction sector as a whole uses about 40% of the world’s resources annually. 

In its answer to a public consultation on the Future Buildings Standard that was completed in April, the Department for Levelling-Up, Housing, and Communities (DLUHC) outlined the adjustments, which include temporary updates to Parts L and F and the introduction of Part O. 

As we progress toward the introduction of the Future Homes and Building Standard in 2025, these updates go into effect in June 2022 and serve as a stepping stone to assist the construction industry in adapting to changing rules and low-carbon heating. 

What are Part L Building Regulations? 

Part L of the building code applies to all construction projects in the UK that are new or modify the usage of a building, including homes and other structures. It lays up the requirements for energy efficiency and carbon emissions from new and existing structures. 

To reach net-zero carbon, the government set new objectives in December 2021 that included a decrease in emissions of 27% and a reduction in CO2 of 30%. There won’t be a need for retrofitting on new construction between 2022 and 2025 because the new laws have been created to anticipate the 2025 Building Standards. 

Both renovations to existing structures and all newly constructed homes are regulated by Part L. 

The detailed list of revisions includes several informational criteria, such as supply chain sourcing and evidence of energy efficiency provided by intricate computations. 

What are the New Part L building regulations and their significance? 

What is the New Part L building regulations

The amended Plan L expedites the switch from gas boilers to low-carbon technologies. Instead, of relying on heating equipment, fabric-first heat retention is the main goal. Future housing must rely on construction materials to carry the load. 

In light of this, the Plan L revisions tighten the minimum standards for thermal elements, windows, and doors that are new and being replaced. 

  • Core Energy Source – The efficiency of a home’s heating system as well as upstream energy consumption, such as power plant efficiencies, fuel transportation, and conservation, will be taken into account when determining the new primary energy objective. As a result, achieving this criterion will depend on the type of fuel used for space and water heating as well as on-site energy production. 
  • Material Energy Efficiency – The regulations’ implementation of the “Full FEES” (Fabric Energy Efficiency Standard) aim will improve the Fabric Energy Efficiency indicator. Compared to Part L 2013, this probably calls for enhancements in several specification areas. 
  • Basic Standards for Fixed Building Services and Materials – The adoption of updated minimum U-Values for thermal elements will provide relatively little improvement over the existing minimum criteria. New requirements for lighting, heating, cooling, and plumbing have been established, and the worst-performing building services products will no longer be allowed to be specified. 
  • CO2 Emissions – CO2 emission regulations in Part L 2021 will increase by 30% from Part L 2013 levels. Before the introduction of the Future Homes Standard in 2025, this is regarded as an appropriate intermediate measure.  
  • U-Values – U-Values calculate & measure how well a material prevents heat from transferring from the interior to the outside of a house. The U-value should be as low as possible because it indicates how quickly heat can move through your home. 

The Future Homes Standard will need U-Values at a minimum, while the proposed “Zero Carbon Standard” will demand them at a slightly stricter level. Airtightness is also affected by this. 

The following new levels are suggested, and are included in the government’s answer to the most current consultation on the Future Homes Standard: 

  • Walls – 0.18 
  • Roof – 0.13 
  • Windows – 1.4 
  • Door – 1  
  • Floor – 0.13

Airtightness – There will be no more sample testing allowed. Pressure tests for airtightness must be performed on every structure. 

The revised air tightness target is 8m3/(hm2) @50Pa, which is 2 points less than the previous target of 10. When The Future Homes and Buildings Standard is fully implemented in 2025, this will decrease once again to 5m3/(hm2) @50Pa. 

This more exacting goal will make it possible to reach the targets for lower carbon emissions while maintaining the viability of low-temperature heating technologies like air source heat pumps. 

  • Photographic Project Evidence – The new regulation state that photographic proof must be offered all along a project’s lifecycle. These images must also be linked to a project and specific site location. 

Changes to part F (Ventilation) 

Controlling the airflow in, out, and throughout the home through controlled ventilation becomes more critical when new construction air tightness decreases because of new rules. In order to achieve the necessary air changes to preserve air quality, choosing the right ventilation strategy is essential. 

Homes with an air tightness rating of 3m3/(hm2) @50Pa or less are required to have continuous mechanical ventilation installed, whether it is centralized or distributed. Fan flow rates, however, have not changed as a result of the new requirements. 

The objectives for Equivalent Areas for background ventilators for natural ventilation without mechanical extracts have been raised, and Passive Stack (System 2 ventilation) and Positive Input Ventilation (PV) have been eliminated. 

Changes to part O (Standards for overheating in new residential buildings) 

Part O aims at ensuring that new residential structures, such as residences, care facilities, student housing, and children’s homes, are built to minimize overheating. It divides England into “moderate risk” and “high risk” overheating regions, the latter of which includes some urban and suburban districts of London. 

In order to comply with the rule, excess heat must be removed, and sunlight gain must be minimized. It proposes a standard for the maximum amount of glazing permitted in a single room and establishes limits based on orientation and whether the house or residential unit is cross-ventilated. 

In contrast to the more straightforward approach, dynamic thermal analysis methods of overheating risk in homes enable more complex analyses of buildings. 

Acceptable methods for reducing midsummer solar gain that isn’t desired include shade and other techniques. A dynamic thermal assessment must not take inside blinds or tree cover into account because they can be later removed. 

Part O implements steps to ensure that inhabitants can safely use overheating tactics while also considering factors such as the security of the home, the usability and safety of the windows, and noise and pollution in the neighborhood that may have an impact on occupant behavior. The building owner must be given information on overheating prevention measures in the form of a Home User Guide. 

New Standards for Domestic Buildings 

C02 emissions from residential properties must be reduced by 30%. The reduction in CO2 will be complemented by the need for new fabric materials that are more efficient, improving the U values of walls from 0.28W/m2 to 0.18W/m2, while windows, roof lights, and doors must have a minimum U value of 1.4. Additionally, the SAP approach for compliance for measurements of fabric energy efficiency and primary energy must be followed for extensions to existing properties. This will prevent “direct electric heating systems from being utilized in improper conditions leading to exorbitant bills for householders,” the government claims. 

A 27% CO2 reduction improvement, or a 5% improvement over the 2013 requirements, is required for non-domestic buildings. A new primary performance metric evaluating energy efficiency is one of the revisions to Part L. CO2 measures and the principal energy use will be used to assess compliance with Part L. The primary energy calculations will take into consideration elements like the effectiveness of the building’s heating systems, the effectiveness of the electricity-generating plants, and the energy required to produce and transport fuel to the building. 

New efficiency standards for new and replacement thermal elements, windows, and doors are being introduced by the new part L standard. The most significant changes include a reduction in wall U values from 0.35 W/m2 K to 0.26 W/m2 K, and a minimum norm of 1.6 W/m2 K for most new windows and curtaining walling. 

For all lighting installations in new non-domestic reporting, the revisions to part L mandate an improvement in lighting efficiency to 95 luminaire lumens per circuit watt for general illumination. Any new domestic structure constructed in accordance with the new Part L will require a building automation and control system if it has a 180kW heating or cooling system. 

Wet space heating systems must be designed to function with a maximum flow temperature of 55°C for both domestic and non-domestic properties. 

Future of Net-Zero Carbon 

The built environment’s contribution to climate disaster cannot be fully addressed by merely repaying carbon obligations. Instead, we should strive to create “net positive” and “regenerative” structures that produce more than they consume. Instead of concentrating only on new construction, this strategy pushes beyond net-zero toward a more comprehensive idea of decarbonization that addresses the urgent problem of existing structures. 

Implementing Plan L changes and the upcoming stricter standards will heavily rely on architects. Practical actions like U-value reductions and air source heat pumps will reduce emissions as we get closer to decarbonization. However, cooperative working methods will produce comfortable & compliant dwellings. 

Architects will set the standard for cooperation and dedication among all build teams as project pioneers and leaders. The new strategy will move us closer to achieving our net-zero goals, and the sooner the advantages start to materialize, the better.

Follow INDOVANCE Inc for AEC Industry Updates and Global Construction News. 

INDOVANCE Inc with its exclusive delivery hub in India is a global CAD technology partner serving the needs of the AEC industry since 2003. At INDOVANCE we focus on the unique need of each project or client and believe in addressing the real challenges and guarantee that the process will be well-coordinated, smooth, efficient, and hassle-free. 

We collaborate with our customers around the world to develop bespoke business solutions using our enormous engineering talent pool and state-of-the-art technology. To deliver long-term engineering and business strategies, we align with your culture and processes to create an unbreakable partnership. With over 300 full-time employees and more than 600 customers in the US, Europe, India, and Asia, we are poised for the next level of success. 

For more queries regarding any of the above-mentioned topics, feel free to connect with us on our website www.indovance.com, or contact us on +1-919-238-4044 

Get A Quote- Indovance

Latest Posts
  • All Posts
  • Architecture
  • CAD Info
  • Civil
  • Corporate Social Responsibility
  • Events
  • Industry Info and CAD Tips
  • Mechanical
  • News
  • Press Releases
  • Publishing
  • Signage
  • Uncategorised

Related Posts

Quick Links

Indovance Inc

Billing Address
1051 Pemberton Hill Road, Suite 101, Apex, NC 27502, USA

Indovance Pvt Ltd

Offshore CAD Studio
4th Floor, Navale Prestige, Narhe, Pune 411 041, Maharashtra, India
© 2023 Indovance. All Rights Reserved.
Scroll to Top